|
 |
|
|
 |
 |
 |
 |
 |
 |
|
 |
 |
 |
| |
SkyTron cables are
available from... |
| |
 |
| |
 |
|
 |
SkyTron cables
for Celestron telescope mounts. These will fit any Celestron mount requiring a
2.1mm jack and using 12vdc such as the Nexstar or CG-5 series. These cables are
not suitable for the CGEM series mounts.
Check here for CGEM compatible cables or
HERE for the Celestron Pro Series II
Cables for the CGE Pro, CGEM and Nexstar
Series
Please read the tech tips
section regarding Celestron mounts.
SkyTron Cables are made from a
tough yet flexible two core cable rated at 6A - more than enough to handle the
demands of Celestron mounts and are manufactured to a very high quality which
includes shrouded ends and internal strain reliefs to provide a durable and
reliable cable. |
 |
ST-02 Cigar Lighter Adapter to 2.1mm Jack (5 meter
nominal)
Compatible with any Celestron mount requiring a 2.1mm
DC jack plug . Centre positive cable.
Cable fitted with a cigar
adapter plug which has a red LED operation lamp, internal 3A fuse and strain
relief. The 2.1mm jack end has internal sleeving to protect against shorts in
damp conditions.
Cable is rated at 6A and is both tough and flexible and
able to withstand a wide range of temperatures. |
 |
ST-04 M8 Ring Tongue to 2.1mm Jack
(5 meter nominal)
Compatible with any Celestron mount requiring
a 2.1mm DC jack plug . Centre positive cable.
Cable fitted
with crimped, soldered and shrouded M8 ring tongues to fit most bench type
power supplies. The 2.1mm jack end has internal sleeving to protect against
shorts in damp conditions.
Cable is rated at 6A and is both tough and flexible and
able to withstand a wide range of temperatures.
WARNING - ST-04 cable is unfused. Ensure your PSU has a
suitable fuse or circuit breaker to protect your mounts
electronics. |
|
|
|
