|
 |
|
|
 |
 |
 |
 |
 |
 |
|
 |
 |
 |
| |
SkyTron cables are
available from... |
| |
 |
| |
 |
|
 |
SkyTron cables
for Celestron CGEM telescope mounts. These will fit the Celestron CGEM mount
which requires a longer 2.1mm jack fitting. For the enhanced Pro Series II
Cables for the CGEM and CGE Pro go HERE
SkyTron Cables are made from a
tough yet flexible two core cable rated at 6A - more than enough to handle the
demands of Celestron mounts and are manufactured to a very high quality which
includes shrouded ends and internal strain reliefs to provide a durable and
reliable cable. |
 |
ST-02-CGEM Cigar Lighter Adapter to 2.1mm Jack (5 meter
nominal)
Compatible with the Celestron CGEM mount with long
2.1mm jack for a more secure power fitting. Centre positive
cable.
Cable fitted with a cigar adapter plug which has an LED operation
lamp, internal 3A fuse and strain relief. The 2.1mm jack end has internal
sleeving to protect against shorts in damp conditions.
Cable is rated at 6A
and is both tough and flexible and able to withstand a wide range of
temperatures. |
 |
ST-04-CGEM M8 Ring Tongue to 2.1mm
Jack (5 meter nominal)
Compatible with the Celestron CGEM mount
with long 2.1mm jack for a more secure power fitting. Centre positive
cable.
Cable fitted with crimped, soldered and shrouded M8 ring tongues to
fit most bench type power supplies. The 2.1mm jack end has internal sleeving to
protect against shorts in damp conditions.
Cable is rated at 6A and is both tough
and flexible and able to withstand a wide range of temperatures.
WARNING - ST-04 cable is unfused. Ensure your PSU has
a suitable fuse or circuit breaker to protect your mounts
electronics. |
|
|
|
